Analysis and Optimization of Abrasive Water Jet Machining of EN9 material using Taguchi Method

Authors

  • Aakar Parikh ME AMS Student, VICT, Gandhinagar
  • Nikunj Modh Asst Prof, Mechanical Department, VICT, Gandhinagar

Keywords:

Traverse speed, Abrasive flow rate, Standoff distance, Material removal rate, Surface roughness, ANOVA and SN ratio

Abstract

The Objective of doing this research work was to know the effects of the various parameters like Traverse
speed, Abrasive flow rate, and Standoff distance on the material En9. The experimental investigations were conducted to
assess the influence of abrasive water jet machine process parameters on response parameters like material removal rate
and surface roughness. The approach is based on Taguchi method and experiments are being carried out using L25
orthogonal array for the En9 material.

Downloads

Published

2015-05-25

How to Cite

Aakar Parikh, & Nikunj Modh. (2015). Analysis and Optimization of Abrasive Water Jet Machining of EN9 material using Taguchi Method. International Journal of Advance Engineering and Research Development (IJAERD), 2(5), 916–921. Retrieved from https://ijaerd.com/index.php/IJAERD/article/view/1115

Issue

Vol. 2 No. 5 (2015): Volume 2 Issue 5, May 2015

Section

Articles