Design And Manufacturing of Double Pipe Heat Exchanger

Authors

  • Archit Patel U.G. Student,Mechanical Engineering Department, Chhotubhai Gopalbhai Patel Institute of Technology, Bardoli, Surat, India
  • Vinit Patel U.G. Student, Mechanical Engineering Department, Chhotubhai Gopalbhai Patel Institute of Technology, Bardoli, Surat, India
  • Chintan Bhatt U.G. Student,Mechanical Engineering Department, Chhotubhai Gopalbhai Patel Institute of Technology, Bardoli, Surat, India
  • Chirag Singapuri U.G. Student,Mechanical Engineering Department, Chhotubhai Gopalbhai Patel Institute of Technology, Bardoli, Surat, India
  • Urvin Patel Assistant Professor,Mechanical Engineering Department, Chhotubhai Gopalbhai Patel Institute of Technology, Bardoli, Surat, India

Keywords:

heat exchanger, LMTD, NTU, nusselt number, prandlt number, water(H2O), mild steel

Abstract

The design of double pipe heat exchanger for the laboratory used is aim to carry out the design of heat
exchanger using data available from experiment and literature. The heat exchanger is aimed to manufacture and to
prepare a experimental setup by means of this setup one can perform a practical work to understand concept of heat
exchanger. Mild steel pipes are used for preparation of setup in both pipes. The effectiveness of this setup would be
targeted between 10 to 20 as the losses and human errors are concerned

Published

2016-07-25

How to Cite

Archit Patel, Vinit Patel, Chintan Bhatt, Chirag Singapuri, & Urvin Patel. (2016). Design And Manufacturing of Double Pipe Heat Exchanger. International Journal of Advance Engineering and Research Development (IJAERD), 3(7), 64–68. Retrieved from https://ijaerd.com/index.php/IJAERD/article/view/1543