Pnuematic Base Robotic Arm

Authors

  • K.P.Suryawanshi Mechanical Engineering, Guru Gobind Singh Polytechnic, Nashik
  • Mayur Deshmukh Mechanical Engineering, Guru Gobind Singh Polytechnic, Nashik
  • Vaibhav Mahajan Mechanical Engineering, Guru Gobind Singh Polytechnic, Nashik
  • Satish Kasar Mechanical Engineering, Guru Gobind Singh Polytechnic, Nashik
  • Jyoti Kute Mechanical Engineering, Guru Gobind Singh Polytechnic, Nashik

Keywords:

Pneumatic Cylinder, WiperMotor, BevelGear, OperatorSwitch, MountingFabrication, Holding Gripper.

Abstract

Pneumatic robot arm are essential for materal handling for heat treatment or in chemical industries where
electrical or hydraulic are unsustainable due to short circuit and fire hazard.
The study was carried out mainly to replace the robotic arms that utilize electric or hydraulic drive and to design a
pneumatic base robotic arm which would be highly effective and low coast with the approach with the aim works
individual component optimisation. According to NFIRS/NFPA national statisticaldatabase, about 16% of the structural
fires in the US are caused by electrical current from electrical and electronic equipment.

Published

2017-03-25

How to Cite

K.P.Suryawanshi, Mayur Deshmukh, Vaibhav Mahajan, Satish Kasar, & Jyoti Kute. (2017). Pnuematic Base Robotic Arm. International Journal of Advance Engineering and Research Development (IJAERD), 4(3), 411–416. Retrieved from https://ijaerd.com/index.php/IJAERD/article/view/2045

Most read articles by the same author(s)